Caterpillar 3406E Engine Inframe Rebuild Kit (IPD Brand) Two Piece Piston-caterpillar-3406e-engine-inframe-rebuild-kit-ipd-brand-two-piece-piston
Caterpillar 3406E Engine Inframe Rebuild Kit (IPD Brand) Two Piece Piston
| Parts Included in Inframe Rebuild Kit (6) Liner Kits (Sleeve/Liner, Piston, Rings, Wrist Pin, Liner Seals) (6) Rod Bearings (1) Main Bearing Set (1) Upper Gasket Set (Includes Injector Seals) (1) Oil Pan Gasket Parts Included in Overhaul Rebuild Kit (6) Liner Kits (Sleeve/Liner, Piston, Rings, Wrist Pin, Liner Seals) (6) Rod Bearings (1) Main Bearings (1) Complete Overhaul Gasket Set (Includes Crank Seals & Injector Seals) Cylinder blocks must be precisely checked for concentricity and deck surface condition prior to liner installation. Anything less than perfect condition at these points can lead to cracked flanges on the cylinder liner. Failure to thoroughly inspect these two areas is the leading cause of liner flange cracking and should be the foremost consideration if liner flange failure occurs. 100% of IPD liners are magnufluxed prior to shipment. CLAIMS SENT TO IPD INVOLVING CRACKED CYLINDER LINERS WILL NOT BE CONSIDERED WITHOUT SUFFICIENT EVIDENCE AS TO CYLINDER BLOCK CONDITION. For cylinder block deck inspection criteria and proper liner protrusion refer to the appropriate OEM service manual or the OEM block joint repair procedure (SEHS9564-1). All IPD hardened liners are coated with a rust preventative during packaging. Each liner must be cleaned of this coating and then dried before placing it in the cylinder block. The liner should be cleaned with soap, warm water and a bristle brush taking extra care at the seal ring groove and filler band groove areas. Carefully dry with compressed air after cleaning is complete. |
%20Two%20Piece%20Piston-caterpillar-3406e-engine-inframe-rebuild-kit-ipd-brand-two-piece-piston){kind=link}